A3 L4-2.0L Turbo (BPY) (2006)
Power Window Safety Switch: Service and Repair
Passenger Window Regulator Switches
Passenger Window Regulator Switches
Removing
-
Switch off ignition and remove ignition key.
-
Remove front door trim.
-
Detach insulating mat from door trim.
-
Disconnect electrical connector - 1 -.
-
Carefully release catches - arrows - using a small screwdriver.
-
Pull window regulator switch - 2 - downward out of the switch mount.
Installing
Install in reverse order of removal, noting the following:
-
Press window regulator switch into switch mount until catches engage.
-
Install front door trim.