A3 L4-2.0L Turbo (BPY) (2006)
Power Window Switch: Service and Repair
Drivers Side Window Regulator Switch, Removing and Installing
Drivers Side Window Regulator Switch, Removing And Installing
Removing
-
Switch off ignition and remove ignition key.
-
Remove door trim.
-
Remove armrest.
-
Release retaining hooks on armrest side by pressing on retaining bar - arrows -.
-
Carefully release retaining hooks - 2 - and - 3 - on trim side with a small screwdriver.
-
Remove window regulator switch - 1 - downward out of switch mount.
Installing
Installation is reverse of removal, but note the following:
-
Press window regulator switch into switch mount until retaining hooks engage.
-
Install armrest.
-
Install door trim.