A3 L4-2.0L Turbo (BPY) (2006)
![background image](/audi/a3/l4-2.0l_turbo_(bpy)/Page-7480001.png)
Wiper Motor: Service and Repair
Windshield Wiper System - Wiper Motor Control Module J400, Removing and Installing
Windshield Wiper System -Wiper Motor Control Module J400, Removing And Installing
Special tools, testers and auxiliary items required
-
Removal lever 80-200
Removing
NOTE:
-
In order to prevent potential damage to wiper arms, the windshield wipers will not function, or will cease functioning should the front hood be
opened.
-
If Wiper Motor Control Module J400 is to be replaced, connect VAS 5051/5052 and initiate OBD program. option "J400. replacing"
-
Switch on ignition.
-
Actuate touch-wipe function and allow wiper motor to move to end position.
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Use screwdriver to pry off wiper arm caps.
-
Loosen nuts -arrows- (do not remove).
-
Loosen wiper arms from wiper shaft by tilting slightly, remove nuts and remove wiper arms.