A3 L4-2.0L Turbo (CBFA) (2008)
Parking Assist Distance Sensor: Service and Repair
Park Assist, Through 05.2008
Rear Parking Aid Sensors
-
Component location: In rear bumper - arrows -.
NOTE:
-
The bumper is removed in the illustration.
-
Senders can be taken out without removing rear bumper.
Removing
-
Switch off ignition and remove ignition key.
-
Disconnect electrical harness connector - 1 - at sensor.
-
Push both catches aside - arrows - and press sensor - 2 - through from outside toward inside.
Installing
Install in reverse order.