A3 L4-2.0L Turbo (CBFA) (2008)
/Page-3061002.png)
Vehicles with automatic transmission:
-
Version I: Remove selector lever cover.
-
Version II: Remove selector lever boot and cover.
All:
-
Remove left and right grab handles.
-
Unclip parking brake cover.
Center console with cigarette lighter or 12 Volt socket in storage compartment:
-
Remove cigarette lighter or 12 Volt socket.
Mount with cigarette lighter and 12 Volt socket in storage compartment - versions for specific countries:
-
Remove cigarette lighter and 12 Volt socket.
Center console with Function Selector Switch II E272 and cigarette lighter:
-
Remove the Function Selector Switch II E272.
All:
-
Remove rear ashtray.
Center console with rear storage compartment:
-
Remove rear storage compartment.
Mount with left/right heated rear seat control module:
-
Remove mount with left/right heated rear seat control module.
Central locking switch mount - versions for specific countries:
-
Remove central locking switch mount.
Vehicles with center armrest:
-
Remove center armrest.
All:
-
Identify allocation of cover - 3 -, - 4 -, - 6 - and - 7 -.
-
Using a flat head screwdriver, pry out cover - 3 -, - 4 -, - 6 - and - 7 -.
-
Remove screws - 2 - (qty. 4).
-
Remove bolts - 8 - (qty. 2)
-
Remove omega clips - 9 - (qty. 2)
-
Remove bolts - 10 - (qty. 2)
-
Tip rear center console upward.
-
Disconnect electrical connectors that are still present.
-
Remove center console - 1 -.
Installing
Installation is reverse of removal, but note the following:
-
Install left and right grab handles before installing front storage compartment cover and storage compartment.
-
Ensure omega clips are positioned correctly - 9 -.
-
When installing covers - 3 -, - 4 -, - 6 - and - 7 -, ensure allocation is correct (all covers are constructed differently).
-
Ensure covers - 3 -, - 4 -, - 6 - and - 7 - engage correctly (audibly).
2
-
Screws - 3 Nm
-
Qty. 4
2
-
Cover
-
Clipped in
-
NOTE location
4
-
Cover
-
Clipped in
-
Note location
5
-
Instrument panel
6
-
Cover
-
Clipped in
-
Note location