A3 L4-2.0L Turbo (CBFA) (2008)
Turn Signal Bulb: Service and Repair
Halogen Headlamps, From 06.2008
Front Turn Signal Bulb
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Remove the air filter housing on the left headlamp: gasoline engine .
-
Remove the high beam housing cover - 1 - from the headlamp housing - arrow -.
-
Turn socket - 1 - counterclockwise - arrow - and remove from housing.
-
Press the release downward - arrow - and disconnect the connector - 2 - from the lamp - 1 -.
Installing
Install in reverse order of removal, observing the following:
-
Insert the new bulb into the housing without touching the bulb with bare hands.
-
Close the housing cover.
-
Install the air filter housing on the left headlamp: gasoline engine.