A3 L4-2.0L Turbo (CBFA) (2008)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module
Removing
‹› The tire pressure monitoring control module is located under the glove compartment.
Before removing control module, read out code using Guided Fault Finding in "Replace control module" function.
-
Remove glove compartment.
-
Press the locking mechanism - arrow - upward and pull the tire pressure monitoring system control module - 1 - out of the retainer slightly.
-
Disconnect connector - 2 - and remove the tire pressure monitoring system control module - 1 - from the retainer.
Installing
Installation is in reverse order of removal.
-
If tire pressure monitoring control module is replaced, system must be recoded. Refer to => [ Tire Pressure Monitoring System Usage ] See:
Wheels and Tires/Tire Monitoring System/Description and Operation/Tire Pressure Monitoring System Usage.