A3 L4-2.0L Turbo (CBFA) (2008)
Ride Height Sensor: Removal and Replacement
Vehicle Level Sensor (FWD)
Vehicle Level Sensor (FWD)
Special tools, testers and auxiliary items required
^
Torque Wrench V.A.G 1331
Removing
-
Separate connector -1-.
-
Remove bolts -2- and -3-.
-
Remove sensor.
Installing
Installation is in reverse order of removal. Observe the following when doing so:
Sensor left must face toward outside of vehicle.
-
After replacing, perform basic setting for headlights.
Tightening specifications