A3 L4-2.0L Turbo (CBFA) (2008)
Headlamp Washer Spray Nozzle: Service and Repair
Headlamp Washer System Spray Nozzles, Through 05.2008
Headlamp Washer System Spray Nozzles
Special tools, testers and auxiliary items required
-
Hose Clamp Pliers V.A.
Removing
-
Remove front bumper cover.
NOTE: Protect bumper cover by laying rag underneath and secure nozzle using pliers.
-
Pull spray jet covers upward at bumper and carefully unlatch retainers - arrows - .
-
Disconnect water hose - 1 - from nozzle - 4 - .
-
Remove screws - 2 - and - 3 - and remove spray nozzle.
Installing
Install in reverse order of removal, noting the following:
NOTE: Secure all hose connections using standard hose clamps.
-
Install hose clamps with Hose Clamp Pliers V.A.G 1275 .