A3 Mk1
Removing glove box |
1 - | Bolts (2x) |
q | Tightening torque: 5 Nm |
2 - | Glove box |
t | Removing |
– | Switch off ignition and remove ignition key. |
– | With ignition switched off, disconnect earth wire at battery → Electrical system; Rep. Gr.27. |
– | Unclip dash panel end trim. |
– | Unscrew bolts -1- (2x). |
– | Remove bolt -3- (1x). |
– | Open glove box. |
– | Unscrew bolts -4- (2x). |
– | Pull out glove box slightly |
WARNING
|
– | Unplug connector for glove box light. |
3 - | Bolt (1x) |
q | Tightening torque: 5 Nm |
4 - | Bolts (2x) |
q | Tightening torque: 5 Nm |
5 - | Dash panel cross member |