Audi Workshop Service and Repair Manuals

• ‒ Door trim and door sub-frame removed.

Note:

The window lifter motor can be installed or removed with the motor and door window in any position.

After installing the motor and wiring, first turn the ignition on and off.

Then run the door window up to the top position and hold the window lifter switch for about another 2 seconds.

The window lifter is now in the basic setting and the up/down function is activated.

• ‒ → Unscrew Torx bolts -arrows- (T30) and remove motor.
• ‒ Tightening torque 6.5 Nm.