Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Front door handle pre-assembly >
< Front door handle - exploded view
A3 Mk1
Body
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door, central locking / Front door
Removing door handle
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door
Removing door handle
Door handle mount
◆
The lock cylinder is part of mount and cannot be replaced separately.
Locking pin
◆
Hinged lever must fully engage in spring catch when installing.
Hinged lever
Door handle
◆
Door trim and door subframe removed prior to removal of door handle.
◆
Remove locking pin -2- and fold up hinged lever -3- to remove.
◆
Release slide on door handle mount -1- using a screwdriver => Fig.
1
.
◆
Detach mount for door handle and lock cylinder with door handle.
Fig.1 → Releasing mount for door handle
‒
Use small screwdriver to release catch for slide, -arrow -A- by raising it slightly.
‒
Release slide -1- in direction of arrow -C- using a screwdriver which must be pushed in direction of arrow -B-.
Fig.2 → Removing cover
‒
To remove, pull up door handle -2- push out catch -1- in axial direction with small screwdriver and detach trim -3-.
Body
General Body Assembly Exterior (Repair groups 50, 55, 57, 58, 60, 63, 64, 66)
Front door, central locking / Front door
Removing door handle
Front door handle pre-assembly >
< Front door handle - exploded view