Audi Workshop Service and Repair Manuals

• Seal
• ◆ Before removing:
• ‒ Take out rear seat bench and backrest.

=> General Body Assembly; Repair group 72

• ‒ Also remove side trim and -B- pillar trim.

=> General Body Assembly; Repair group 70

• ‒ Unbolt tilt mechanism from side window on body side.
• ‒ Pull seal out of window opening.
• ‒ Press new seal onto window flange.

• Side window
• ◆ Before removing:
• ‒ Take out rear seat bench and backrest.

=> General Body Assembly; Repair group 72

• ‒ Also remove side trim and -B- pillar trim.

=> General Body Assembly; Repair group 70

• ◆ To remove:
• ‒ Unscrew tilt mechanism -3- on body end
• ‒ To remove, drill head off hollow rivet -4-, and knock out shank.
• ‒ Unscrew hexagon bolt -7-.
• ‒ Remove side window from opening.

• Tilt mechanism
• ◆ Removing => Page 64-40
• Hollow rivet
• Shim plate
• ◆ Pull off protective film.
• Hexagon nut
• ◆ 8 Nm