Audi Workshop Service and Repair Manuals

• Belt reel
• ‒ Remove 2/3 backrest
• ‒ Lever off trim caps -6- (2x) using flat screwdriver.
• ‒ Unscrew bolt -8-, counterholding counter nut -7-.
• ‒ Detach belt delivery arm -4-.
• ‒ Unclip trim cap -10-, starting at bottom.
• ‒ Detach webbing guide -9-.
• ‒ Remove upholstery from 2/3 backrest => Page 74-54
• ‒ Unscrew bolts -3- (4x).

• ‒ Detach webbing mount -11-.
• ‒ Disconnect Bowden cable -15- at belt reel -1- => Fig.1
• ‒ Unscrew nut -2-.
• ‒ Remove bolt -17- from belt buckle.
• ‒ Detach belt reel -1- from backrest, drawing the webbing -5- and belt buckle through guide -13-.

• Hexagon nut
• ‒ Tightening torque 55 Nm
• Hexagon socket head bolts
• ‒ Tightening torque 23Nm
• Belt delivery arm
• Belt
• ◆ The webbing can only be removed with the backrest engaged in position.

• Trim cap
• Bolt
• ‒ Tightening torque 1.5 Nm
• Counter nut
• Belt guide
• Trim cap
• Webbing mount
• 2/3 backrest
• Guide
• Hexagon nut
• ‒ Tightening torque 2.5 Nm
• Bowden cable
• ‒ Remove 2/3 backrest => Page 72-186

• ‒ Lever off trim caps -6- (2x) using flat screwdriver.
• ‒ Unscrew bolt -8-, counterholding counter nut -7-.
• ‒ Detach belt delivery arm -4-.
• ‒ Unclip trim cap -10-, starting at bottom.
• ‒ Detach webbing guide -9-.
• ‒ Remove upholstery from 2/3 backrest => Page 74-54
• ‒ Disconnect Bowden cable -15- at belt reel -1- => Fig.1
• ‒ Disconnect Bowden cable -15- from backrest lock => Fig.2

• Bracket
• Bolt
• Padding

Fig.1    Disconnecting Bowden cable at belt reel

• ‒ Lever out clip -A- in direction of arrow using a flat screwdriver.
• ‒ Lever off bracket -B- in direction of arrow using a flat screwdriver.
• ‒ When installing, press pin -C- onto lug -D-.
• ‒ Insert bracket -B- home when installing.

•     1 -    Belt reel
•     15 -    Bowden cable

Fig.2    Disconnecting Bowden cable at backrest lock

• ‒ Unscrew nut -14-.
• ‒ Detach the Bowden cable -15- with bracket -16- at -A-.