Audi Workshop Service and Repair Manuals

• ‒ Remove seat

Note:

For greater clarity, the seat is shown from below. Sliding unit is not available as a spare part. Belongs to ZSB- seat pan.

• Spring
• ‒ Detach (3x).
• Seat pan
• Clip
• Rivets
• ‒ Drill out (2x).
• Rear bush
• Front bush
• Longitudinal adjustment mechanism
• Slider block
• ◆ Cut through rivet to remove => Fig.4
• Front slides

Fig.4    Cutting through rivet to remove slider block

• ‒ Operate release lever for longitudinal seat adjustment and push slider block to the rear.
• ‒ → Using a metal saw -3- cut through sleeve -2- and rivet -1-.
• ‒ Remove all metal particles from seat pan.
• ‒ The rivet -1- is replaced by the service department with a bolt, a nut and a new sleeve -2-.
• ‒ Tightening torque 15 Nm