audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing Bowden cable cover > < Removing inner fitting panels
General Body Assembly, Interior (Repair groups 68, 69, 70, 72, 74)
Front sports seat
Removing and installing seat height adjuster unit
 
A72-0401
  • ◆ Removing
    • ‒ Fully raise the seat before removal.
    • ‒ Removing sports seat

Note:

For greater clarity, the seat is shown from below.

    • ‒ Remove seat side panels => Page 72-78
    • ‒ Detach spring -2- from retaining hook working from inside -3-.
    • ‒ Disengage spring -4- from retaining hook working from outside -5-.
 
A72-0249
    • ‒ Unscrew bolts -2- (3x).
    • ‒ Remove seat height adjuster unit -1-.
  • Seat height adjuster unit
  • Bolts (3x)
 
A72-0401
  • ◆ Installing
    • ‒ Install seat height adjuster unit.
    • ‒ Reinstall springs if springs -2- and -4- have become disengaged from retaining hooks -6- and -7-.
Important
Injury risk: springs are under strong tension.
    • ‒ Insert the springs -2- and -4-.
  • Seat pan
  • Spring
  • Retaining hooks
  • Spring
  • Retaining hooks
  • Retaining hooks
  • Retaining hooks

Removing Bowden cable cover > < Removing inner fitting panels