Audi Workshop Service and Repair Manuals

• ‒ → Use loops to pull forward and lift up seat bench sections.

• ‒ → Press spring bracket -1- in direction of arrow and guide out of hinges -2-.
• ‒ Lift seat bench sections out of vehicle.

• ◆ For vehicles with third three-point belt:

• ‒ Unscrew attachment point for centre floor panel

• ‒ Fold both backrests down.

Note:

Backrest can only be removed and installed when lying flat.

• ‒ → Push back release hook -1- left and right with a screwdriver and pull out backrest -2- from backrest bearing -3- towards top.
• ‒ Pull backrest out of centre console and remove from vehicle.