Audi Workshop Service and Repair Manuals

• Fitting panels

• ◆ Removing
• ‒ Remove seat
• ‒ Detach plastic lever for backrest release -8- in direction of arrow -A- using taped pliers.

Note:

The plastic tabs -6- on the fitting panel break off easily. If they are damaged during removal, the fitting panel must be replaced.

• ‒ Remove fitting panel -1- downwards so that pin -4- and tabs -5- disengage from its locking tabs -6- and -7-.
• ‒ Remove fitting panel -1- towards outside.

• ◆ Installing
• ‒ Push the fitting edge -2- on the side of the side airbag module underneath the side airbag module -direction of arrow B-.
• ‒ Push on fitting panel -1- in a straight line so that pin -4- and tabs -5- disengage from its locking tabs -6- and -7-.

• Fitting edge
• ◆ Only on side of side airbag module
• Backrest
• Pin
• Clips
• Catch for pin
• Catches for tabs
• Backrest release lever