Audi Workshop Service and Repair Manuals

Notes:

• ◆ The removal and installation procedures may have to be modified slightly depending on equipment versions.
• ◆ On vehicles with memory seat and electric seat, run the seat all the way to the rear and to the top height setting before disconnecting battery.
• ◆ Obtain radio code before disconnecting battery.

• Tab
• Bolts (2x)

Removing

• ‒ Push seat forwards.
• ‒ Removing front seat rail rear cover (outboard side)
• ‒ Removing front seat rail cover behind inboard side => Page 72-112
• ‒ Push back seat.

• ‒ Remove front seat cover
• ‒ Remove bolts -2- between seat and vehicle on the tab -1- at the front of the underside of the seat.
• ‒ Fold front seat upwards.
• ‒ On vehicles with heated seat, unplug connector.
• ‒ On vehicles with side airbag, unplug connectors for side airbag unit and seat occupied sensor.
• ‒ Connect airbag adapter VAS 5094 => Page 72-120
• ‒ Push the seat backwards out of the rails on the vehicle floor.
• ‒ Lift seat out of vehicle.

Installing

Installation is carried out in the reverse order; note the following:

Vehicles with side airbag:

• ‒ Switch ignition on.

• ‒ Connect battery earthing strap.