Audi Workshop Service and Repair Manuals

• ‒ → Detach connector.
• ‒ Remove High-pressure sensor -B-
  Tightening torque: 5 Nm
• ‒ Replace O-ring seal -A- (10.8 mm; 1.8 mm) =>Page 87-22.

Notes:

• ◆ The refrigeration capacity cannot be checked if sender -G65 is removed - control unit -J293 does not switch on the compressor.
• ◆ The refrigerant circuit remains closed - connection with valve.
• ◆ Check function of high-pressure sensor -G65 and signal emitted =>Page 01-225.