Audi Workshop Service and Repair Manuals > A3 Mk1 > Power transmission | 5/6-speed manual gearbox 02M/02Y, four-wheel drive | Final drive, differential, differential lock | Adjusting shaft bevel gear and bevel gear (final drive gear set)

Adjusting shaft bevel gear

Special tools and workshop equipment required

t	Support clamp -VW 313-

t	Universal measuring tool -VW 385-

t	Universal dial gauge bracket -VW 387-

t	Thrust plate -VW 402-

t	Press tool -VW 412-

t	Press tool -VW 472/1-

t	Tube -VW 516-

t	Press piece -3253/7-

t	Tube -VAS 3296-

t	Gearbox support -T10108-

t	Support plate -T10108/1-

t	Torque wrench -V.A.G 1331/-

t	Digital depth gauge -VAS 6087-

t	Feeler gauge (with 0.03 mm scale)

t	Dial gauge

t	Torque gauge, commercially available, 0 ... 600 Ncm

Special tools and workshop equipment required

t	Torque wrench -V.A.G 1601-

Readjustment of the shaft bevel gear is required if

t	Final drive housing

t	Tapered roller bearings for shaft bevel gear

t	Final drive gear set

or the

t	Pinion housing

are renewed.

Table of adjustments → Chapter

Audi Workshop Service and Repair Manuals