Audi Workshop Service and Repair Manuals

• Brake fluid reservoir
• Supply hose
• Master cylinder
• ◆ Removing and installing
  
• Retainer
• ◆ Replace only with master cylinder removed
• ◆ Removing =>Fig.1
• ◆ Pressing on =>Fig.2
• Clutch pedal
• ◆ Removing and installing
  => Page 30-8
• Self-locking hexagon nut, 25 Nm
• ◆ Always renew

• O-ring
• ◆ Always renew
• ◆ Pull onto pipe/hose connection
• ◆ Insert with brake fluid
• Bracket
• ◆ Secured to body
• Pipe/hose assembly
• ◆ With frequency modulator
• ◆ Disconnecting from master cylinder and installing => Page 30-15
• ◆ Allocate using parts catalogue
• Bleeder connection

• Clip
• ◆ Pull out retaining clip to disconnect pipe => Page 30-15
• Bleed valve
• ◆ Bleeding clutch system
  => Page 30-20
• Dust cap
• Gearbox
• Slave cylinder (release bearing with hydraulic actuation)
• ◆ Can only be removed after taking out gearbox
• ◆ Removing and installing
  => Page 30-19

→ Fig.1    Lever retainer -A- off in direction of arrow

→ Fig.2    Press master cylinder operating rod in retainer -A- in direction of arrow