audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Fault tables: Fault codes 00258 up to 00545 > < Interrogating fault memory

A3 Mk1

Fault tables
Fault tables
  Note
t  The following tables list all the possible faults which can be detected by the automatic gearbox control unit -J217- and are displayed on the -VAS 5051B- when the fault memory is interrogated.
t  The content of the fault memory is retained until the memory is erased; erasing fault memory → Chapter.
t  The fault table is sorted according to the 5-digit fault code in the left-hand column.
t  Sporadic faults (which occur intermittently) are displayed as “sporadic”.
t  Components that are indicated as being faulty by the -VAS 5051B- should not be renewed immediately. Always start by checking the wiring and connectors to these components according to current flow diagram. Also check the earth connections according to current flow diagram. This is particularly important for faults displayed as “sporadic”.
   

Fault tables: Fault codes 00258 up to 00545 > < Interrogating fault memory