Audi Workshop Service and Repair Manuals > A3 Mk1 > Power transmission | Automatic gearbox 09A, self-diagnosis | Self diagnosis, V.A.G Inspection Service

Automatic gearbox 09A, Self-diagnosis

Initiating basic setting

The basic setting should be initiated after performing the following repairs:

‒ Connect fault reader V.A.G 1551 and enter address word "02 Gearbox electronics" and advance until "Select function XX" appears in the display => from page 01-25.

→ Indicated on display:

Rapid data transfer HELP

Select function XX

‒ Press keys 0 and 4. (The function "Initiating basic setting" is selected with 04).

Accelerator pedal must remain in idling position.

→ Indicated on display:

Rapid data transfer Q

04 - Basic setting

→ Indicated on display:

Basic setting HELP

Enter display group number XXX

→ Indicated on display:

System in basic setting 0⇒

The system is now in the basic setting.

‒ Depress accelerator pedal as far as kickdown and hold in this position for 3 seconds.
‒ Press key ⇒.

→ Indicated on display:

Rapid data transfer HELP

Select function XX

Audi Workshop Service and Repair Manuals