audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Attaching engine to repair stand > < Removing

A3 Mk1

4-cyl TDI®-Engine, Mechanical Components
Removing and installing engine -vehicles with four-wheel drive-
Detaching engine from gearbox.
 
A10-1367

Procedure

  • ● Engine/gearbox assembly removed and attached to engine mounting T10012.
  • ‒ → Remove bolts -1 ... 6- from angle drive mounting.
 
A34-0234
  • ‒ → Unscrew bolt -1- with gearbox installed.
  • ‒ Pull up splash plate -2-.

Note:

Shown in illustration with gearbox removed.
 
A37-0214
  • ‒ → Unscrew bolts -1 ... 8- at engine/gearbox flange.
  • ‒ Take off starter.

Note:

A 2. mechanic is required to separate engine/gearbox assembly.

  • ‒ Remove gearbox from engine.

Attaching engine to repair stand > < Removing