|
Removing and installing parts of the lubrication system
Removing and installing parts of the lubrication system
Notes:
-
◆ If large quantities of metal shavings or particles are found in the engine oil when repairing the engine, the oil passages must be cleaned carefully, and the oil cooler renewed in order to prevent further damage occurring later.
-
◆ The oil level must not be above max. mark on dipstick - danger of damage to catalytic converter.
-
◆ Oil spray jet and pressure relief valve
=> Fig.17-6
Viscosity grades and oil specifications:
=> Maintenance Manual
Oil system capacity:
=> Exhaust Emission Test binder
| 
