audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Separating engine from automatic gearbox 01M > < Removing engine

A3 Mk1

Separating engine from manual gearbox
Separating engine from manual gearbox
   
Procedure
l  Engine/gearbox assembly removed and attached to engine bracket -T10012-.
–  Unplug electrical connector -arrow- at speedometer sender -G22- on gearbox and move wiring clear.
  A10-0924
Vehicles with four-wheel drive:
–  Unbolt bracket for bevel box from engine and bevel box -arrows-.
  Note
  V34-2099
On vehicles with four-wheel drive, the small cover plate -2- for the flywheel is located behind the bevel box and is not visible with the bevel box installed. Shown in illustration with gearbox removed.
–  Unscrew bolt -1- and lift out cover plate.
  A34-0234
All models:
–  Remove bottom engine/gearbox securing bolts -1 ... 8-.
–  Separate gearbox from engine.
  Note
Second mechanic is required to separate engine/gearbox assembly.
  A37-0214

Separating engine from automatic gearbox 01M > < Removing engine