Notes:
-
◆ Use the hand multimeter V.A.G 1526 or the multimeter V.A.G 1715 and the diode test lamp V.A.G 1527 for the checks.
-
◆ To connect the testers to the test box use the auxiliary cables from adapter set V.A.G 1594.
-
◆ The contact numbers of plugs and socket numbers in test box are identical.
-
‒ → With ignition switched off, unplug connectors from control unit.
-
‒ Connect test box to wiring harness connector.
-
‒ Carry out test as described in the appropriate repair procedures.
Important: To prevent damage to the electronic components, select appropriate measuring range before connecting the measuring cables and observe the test requirements.
|