A3 Mk1
Testing ignition system
Testing coolant temperature sender -G62
|
Special tools and workshop equipment required
Fitting location => Fitting locations overview, Page 24-5 Test requirement:
Test sequence
|
→ Indicated on display: |
|
||
|
→ Indicated on display: |
|
||
|
→ Indicated on display: |
|
|||||||||||||||||||||||||||||||||||
If display zone 3 shows an implausible value:
|
Scale A shows resistance values for temperature range 0...50 °C and scale B the values for temperature range 50...100 °C. |
→ Examples:
If the specification is not attained:
If the specification is attained:
|
If no wiring fault is detected:
|