audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking voltage supply > < Test sequence

A3 Mk1

Checking switch
Checking switch
–  Remove the driver's storage compartment: → Rep. Gr.68
–  Unplug the connector from clutch pedal switch.
   
–  Connect multimeter between contacts 1 and 2 to measure resistance.
t  Specification: approx. 0 Ω
–  Operate clutch pedal.
t  Specification: ∞ Ω (no continuity)
If specification is not attained:
–  Replace clutch pedal switch.
If specification is attained:
  A24-0208

Checking voltage supply > < Test sequence