Audi Workshop Service and Repair Manuals

Removing

• ‒ Remove driver's airbag unit.

=> General Body Repairs, Interior; Repair Group 69; Servicing driver's airbag

• ‒ → Unscrew bolt and detach steering wheel.

•     1 -    Hexagon bolt
•     2 -    Multi-point socket head bolt

Installing

Install in reverse order, paying attention to the following:

→ Steering wheel and steering column are marked.

•     A -    Line on steering wheel
•     B -    Centre punch mark on steering column

This position should not be altered.

Otherwise centre position of rack is not guaranteed.

Vehicles with ESP:

• ‒ → Check whether yellow dot is visible in hole -arrow 1- and that the two marks -arrows- are aligned.

All models:

• ‒ → Attach steering wheel and secure with new bolt.
• ‒ Install driver's airbag unit.

=> General Body Repairs, Interior; Repair Group 69; Servicing driver's airbag

Vehicles with ESP:

• ‒ Start basic setting for steering angle sender -G85.

=> Running Gear, Self-diagnosis; Repair Group 01

• ‒ On vehicles with ABS/ESP Mark 60, perform ESP drive test.

=> Running Gear, Self-diagnosis; Repair Group 01

Tightening torque

    1)    Replace bolt