audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Replacing bulbs for front interior light - as of Model Year 2000 > < Replacing bulbs for front interior light/reading light - up to Model Year 1999
Electrical system
Servicing interior lights
Removing and installing front interior light/reading light - as of Model Year 2000
 
W00-0509

Special tools and workshop equipment required

  • ◆ Hook for front end 3370

 
A96-0533

Removing

  • ‒ → Unclip lens at interior light -arrows-.
 
A96-0452
  • ‒ → Use special tool 3370 to carefully pull off cover for reading light.

 
A91-0616
  • ‒ → If fitted, unplug connector -1- of hands-free microphone.
 
A96-0541
  • ‒ → Screw out bolts -1- and -2-.
  • ‒ Release retainer tabs -arrows- and take interior light/reading light out of roof opening.
  • ‒ Unplug connectors.

Installing

Install in reverse order, paying attention to the following:

  • ‒ Engage interior light and tighten to 1 Nm.
  • ‒ Press on cover for reading lights and lens for interior light until they engage.

Replacing bulbs for front interior light - as of Model Year 2000 > < Replacing bulbs for front interior light/reading light - up to Model Year 1999