Audi Workshop Service and Repair Manuals

Removing

• ‒ → Use screwdriver to prise off caps at wiper arms -arrows- and slacken off hexagon nuts several turns.
• ‒ Detach wiper arms -1- from wiper shaft by tilting slightly.
• ‒ Completely unscrew hexagon nuts and detach wiper arms.
• ‒ Pull off rubber seal -2- of plenum chamber cover.
• ‒ Lift plenum chamber cover -3- such that washer fluid pipe can be disconnected.
• ‒ Unplug connector if fitted.
• ‒ Detach plenum chamber cover -3-.

• ‒ → Use small screwdriver to press back retainer tab -arrow- and at the same time press gently against connection piece.
• ‒ Press spray jet -A- outwards out of plenum chamber cover.

Installing

Install in reverse order, paying attention to the following:

Note:

Fluid hose must be heard to engage in spray jet connection.

• ‒ Set park position of wiper blades .