Audi Workshop Service and Repair Manuals

The following items must always be heeded on replacing dash panel insert:

Perform the following before replacing dash panel insert:

• ‒ If still possible, read out and print out values of all service display adaption channels from old dash panel insert.
• ‒ Note down mileage count.

Notes:

• ◆ Adaption of service display and mileage countermust be made in kilometres even in countries where distances are measured in miles. This involves converting adaption values from miles to kilometres or entering adaption values previously noted down.
• ◆ The immobilizer control unit is integrated into the dash panel insert. Immobilizer adaption must therefore be performed following dash panel insert replacement.

Perform the following after replacing dash panel insert:

• ‒ Encode dash panel insert

and

• ‒ Enter mileage => Page 01-66
• ‒ Enter language version for driver information system (DIS)
  => Page 01-54
• ‒ Correct fuel consumption indicator => Page 01-51 (only if fixed value changed)
• ‒ Correct fuel gauge sender resistance range => Page 01-81 (only if fixed value changed)
• ‒ Reset service display on completion of service work

or

• ‒ Enter remaining mileage prior to OIL CHANGE service
  => Page 01-72
• ‒ Enter remaining mileage prior to inspection service => Page 01-75
• ‒ Enter remaining time prior to inspection service => Page 01-78

and

• ‒ Perform immobilizer adaption after replacing dash panel insert
  => Page 01-333