audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Determination of location > < Fault detection in wiring test

A3 Mk1

Test drive (basic calibration) procedure
Test drive (basic calibration) procedure
The test drive is performed in three stages:
t  Determination of location → Chapter
t  Calibration of voltage tap → Chapter
t  Compass calibration → Chapter
–  Call up technical service software → Chapter.
   
–  Select menu item “TEST DRIVE” with Cursor keys.
Indicated on display:
  A91-0070
SERVICE MENU:
 


>		WHEEL CALIB.
WIRING
TEST DRIVE
SYS. TEST
END		 

–  Confirm selection by pressing ENTER key.
Indicated on display:
   
  
CHECK:
A3 - AB
TYRES: 205/60 15
 
>YES
NO		 

–  Pressing ENTER key to confirm “YES” option results in continuation of the corresponding menu item.
–  The following message appears if selection is not confirmed with ENTER key:
Indicated on display:
   
  
PERFORM
WHEEL
CALIBRATION

 
>OK 

–  Use ENTER key to confirm “OK” display.
Current location is determined first.
   

Determination of location > < Fault detection in wiring test