audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
ABS/ESP ITT Mark 60/ ITT Mark 70 > < General information

A3 Mk2

Connecting VAS 5051 x or VAS 5052 and selecting functions
Connecting -VAS 5051 x- or -VAS 5052- and selecting functions
Special tools and workshop equipment required
   
t  Vehicle diagnosis, testing and information system -VAS 5051 x- or -VAS 5052-
  WARNING
t  Test equipment must always be secured to the rear seat when road-testing the vehicle.
t  While the vehicle is moving this equipment must be operated by a second person; NOT by the driver.
  W00-1236
–  Attach the diagnosis cable connector VAS 5051/5a to the diagnosis connection.
  A01-0201
–  Switch on the tester -arrow-.
The tester is ready as soon as a picture of a car appears in the display.
–  Switch on ignition.
–  Press the Guided Fault Finding button on the display screen.
–  Select the following:
t  Make
t  Model
t  Model year
t  Version
t  Engine code letters
–  Confirm the entered information.
Wait until the tester has interrogated all the control units in the vehicle.
–  Press the Go to button and select the option „Function/component selection“.
Follow the instructions in the display to begin with the desired functions.
  N01-0433

ABS/ESP ITT Mark 60/ ITT Mark 70 > < General information