audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Components located in passenger compartment > < Removing and installing air intake grille
Components for control and regulation of air conditioner located in passenger compartment
Components for control and regulation of air conditioner located in passenger compartment
  Note
t  On vehicles with automatically controlled air conditioner, the operating and display unit, Climatronic control unit -J255- evaluates the signals from the various components and actuates the air conditioner compressor by way of the air conditioner compressor regulating valve -N280-.
t  On vehicles with manually controlled air conditioner, the air conditioning system control unit -J301- evaluates the signals from the various components and actuates the air conditioner compressor by way of -N280-.
t  In the event of a system fault, start by reading out the event recorder of the operating and display unit, Climatronic control unit -J255- or the air conditioning system control unit -J301- → "Guided fault-finding" function of vehicle diagnostic, testing and information system VAS 5051.
t  If no fault is displayed, read out the measured value block of the operating and display unit, Climatronic control unit -J255- or the air conditioning system control unit -J301- and actuate any problematic component by way of the „Final control diagnosis“ function → "Guided fault-finding" function of vehicle diagnostic, testing and information system VAS 5051.
t  Refrigerant circuit servicing work is described as of → Chapter.
t  Perform the following operations on completion of repair work:
–  Interrogate the event recorder of the operating and display unit, Climatronic control unit -J255- or the air conditioning system control unit -J301- and erase any faults displayed.
–  Check the encoding of the operating and display unit, Climatronic control unit -J255-.
–  If necessary, check the adaption of the operating and display unit, Climatronic control unit -J255-.
–  Perform air conditioner basic setting → "Guided fault-finding" function of vehicle diagnostic, testing and information system VAS 5051.
t  Electrical checking of the various control motors, potentiometers and senders is described in the guided fault-finding routine → "Guided fault-finding" function of vehicle diagnostic, testing and information system VAS 5051.
t  Components located in passenger compartment → Chapter
   

Components located in passenger compartment > < Removing and installing air intake grille