Check gear lever setting as follows: |
l
| With the gearbox in neutral, the gear lever should rest in the 3rd/4th gear gate. |
–
| Select all gears several times. Pay particular attention to the operation of the reverse gear locking mechanism. |
Should a gear fail to engage smoothly after repeated selection, check the play (lift movement) of the selector shaft as follows: |
–
| Push gear lever as far as it will go to the left and release. |
–
| At the same time observe selector shaft on gearbox (2nd mechanic). |
–
| The selector shaft should move up and down approx. 1 mm (in direction of -arrow-) when the gear lever is moved. |
If this is not the case, adjust selector mechanism again → Chapter. |
|
|
|