Rules for cleanliness when working on the gearbox |
t
| Carefully clean connection points and the surrounding area with engine cleaner or brake cleaner and dry thoroughly before opening. |
t
| Use cleaning fluid -D 009 401 04- to clean the gearbox and its components. |
t
| Use lint-free cloths for cleaning, such as the „WYPALL X70 / WORKHORSE“ cloth from Kimberly-Clark Professional. |
t
| Seal off open lines and connections immediately with clean plugs or sealing caps from engine bung set -VAS 6122- immediately. |
t
| Place removed parts on a clean surface and cover them over. Use sheeting and paper. Use lint-free cloths. |
t
| Carefully cover or seal open components if repairs cannot be carried out immediately. |
t
| Only install clean components: do not remove replacement parts from packaging until just before installation. |
t
| Protect unplugged electrical connectors against dirt and moisture and make sure connections are dry when attaching. |
|
|
|