| Removing and installing oil pan, ATF strainer, valve body and internal wiring harnesses |
Caution | Do not run engine or tow vehicle with oil pan removed or when there is no ATF in the gearbox. |
|
Note! | t
| Always renew valve body if it has collected dirt or if it is defective. |
| t
| Rules for cleanliness when working on the automatic gearbox → Chapter. |
| t
| Lightly lubricate O-rings and seals with ATF. Other types of lubricant will cause the gearbox hydraulics to malfunction. |
| t
| It is possible to remove valve body and wiring harnesses with 8-pin and 14-pin connector without removing gearbox. |
|
|
|
