audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view - selector mechanism (vehicles up to 11.2009) > < Moving interlock button on selector lever handle into installation position (vehicles from 11.2009 onwards)

A3 Mk2

Removing and installing selector lever display illumination bulbL101 (vehicles from 11.2009 onwards)
Removing and installing selector lever display illumination bulb -L101- (vehicles from 11.2009 onwards)
   
Removing
–  Shift selector lever into position “N”.
–  Switch off ignition and remove ignition key.
–  Unclip retaining frame for selector lever boot -1- from centre console and lift off -arrows-.
–  Turn up selector lever boot.
  A34-10635
–  Unclip retaining frame for selector lever -1- from centre console and lift off -arrows-.
–  Detach selector lever cover.
–  Unplug electrical connector.
  A96-10095
–  Release retaining springs -arrows-.
–  Detach trim frame with selector lever display illumination bulb -L101--item 2- from selector lever cover -1-.
Installing
Perform installation in reverse sequence of removal.
  A96-10131

Exploded view - selector mechanism (vehicles up to 11.2009) > < Moving interlock button on selector lever handle into installation position (vehicles from 11.2009 onwards)