| Checking function of ignition key removal lock |
Note | The vehicle is fitted with an electrical ignition key removal lock, not a mechanical one with a Bowden cable. |
| –
| Press and hold brake pedal. |
| l
| When interlock button in selector lever handle is pressed, it should be possible to move selector lever out of position “P” without “catching”. |
| l
| It should not be possible to remove the ignition key when the selector lever is in any position other than “P”. |
| –
| Shift selector lever into position “P”. |
| l
| It should only be possible to remove ignition key in selector lever position “P”. |
| l
| Selector lever can then not be shifted out of “P” position with interlock button pressed and brake pedal depressed. |
| If the ignition key removal lock does not function as described: |
|
|
|
