A3 Mk2
Charge air cooler - exploded view |
1 - | Intake manifold |
q | Removing and installing → Rep. gr.24 |
2 - | Seal |
q | Renew |
3 - | Throttle valve module -J338- |
q | Removing and installing → Rep. gr.24 |
4 - | Securing clip |
5 - | Bolt |
q | 7 Nm |
6 - | Support ring |
q | Renew |
7 - | O-ring |
q | Renew |
8 - | Air pipe |
9 - | Retaining clip |
10 - | Bolt |
q | 5 Nm |
11 - | O-ring |
q | Renew |
12 - | Charge pressure sender -G31- / intake air temperature sender 2 -G299- |
q | Removing and installing → Chapter |
13 - | Bolt |
q | 3 Nm |
14 - | Intake air temperature sender -G42- / intake manifold pressure sender -G71- |
q | Clipped on |
15 - | O-ring |
q | Renew |
16 - | Seal |
q | Renew |
17 - | Sealing lip |
18 - | Bolt |
q | Screw in bolts initially by hand until they make contact |
q | 7 Nm |
19 - | Charge air cooler |
q | Removing and installing → Chapter |