Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Securing engine to engine and gearbox support >
< Separating engine from manual gearbox
A3 Mk2
Power unit
4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics
Engine assy,cylinder block,crankcase
Separating engine and dual-clutch gearbox
Separating engine and dual-clutch gearbox
Separating engine and dual-clutch gearbox
Special tools and workshop equipment required
t
Shackle -10 - 222 A /12-
t
Workshop hoist -VAS 6100-
Procedure
l
Engine/gearbox assembly removed and attached to engine bracket -T40075-.
–
Move electrical connector
-1-
for Lambda probe -G39- clear at bracket.
–
Move electrical wiring harness clear
-arrow-
.
–
Unscrew bolts
-1-
and
-2-
and remove starter from gearbox.
–
Secure gearbox to workshop hoist -VAS 6100- using shackle -10 - 222 A /12-.
–
Remove bolts
-1 ... 8-
securing gearbox to engine.
Note
Disregard
-item A-
.
–
Detach gearbox from engine.
Power unit
4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics
Engine assy,cylinder block,crankcase
Separating engine and dual-clutch gearbox
Securing engine to engine and gearbox support >
< Separating engine from manual gearbox