Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing sump >
< Sump, oil pump - exploded view
A3 Mk2
Power unit
4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics
Engine lubrication / Sump and oil pump
Removing and installing oil level and oil temperature sender G266
Removing and installing oil level and oil temperature senderG266
Removing and installing oil level and oil temperature sender -G266-
Special tools and workshop equipment required
t
Used oil collection and extraction unit -V.A.G 1782-
Removing
–
Remove noise insulation
→ Rep. Gr.50
.
–
Place used oil collection and extraction unit -V.A.G 1782- below engine and drain off engine oil.
–
Unplug electrical connector
-3-
.
–
Remove bolt
-1-
and detach oil level and oil temperature sender -G266-
-item 4-
.
Installing
l
Tightening torque
→ Chapter
Installation is carried out in the reverse order; note the following:
Note
Renew seal
-2-
.
–
Fill with engine oil and check oil level
→ Chapter
.
–
Install noise insulation
→ Rep. Gr.66
.
Power unit
4-cylinder direct petrol injection engine (1.4 ltr. 4-valve turbo), mechanics
Engine lubrication / Sump and oil pump
Removing and installing oil level and oil temperature sender G266
Removing and installing sump >
< Sump, oil pump - exploded view