A3 Mk2
|
| 1 - | Pipe |
| q | For crankcase breather |
| 2 - | Spring-type clip |
| 3 - | Oil filter bracket |
| q | With pressure relief valve, approx. 4 bar |
| q | Removing and installing → Chapter |
| 4 - | Seal |
| q | Renew |
| 5 - | Oil cooler |
| q | See note → Chapter |
| q | Ensure clearance from surrounding components |
| q | Connection diagram for coolant hoses, engine code AXW, BLX, BHD, BLY, BLR, BMB → Chapter |
| q | Connection diagram for coolant hoses, engine code BVY, BVZ → Chapter |
| q | Removing and installing → Chapter |
| 6 - | 15 Nm |
| 7 - | Oil pressure switch, 20 Nm |
| q | 0.7 bar - brown |
| q | Checking → Chapter |
| q | Tightening torque 21 Nm |
| 8 - | 15 Nm |
| q | With earth wire for oil pressure switch |
| 9 - | Seal |
| q | Renew |
| q | Lubricate with engine oil |
| q | Installation position → Fig. |
| 10 - | Screw plug |
| 11 - | Oil filter housing |
| q | Remove and install with oil filter tool -3417- or 36 mm socket |
| q | Draining → Chapter |
| 12 - | Oil filter element |
| q | Observe change intervals → Booklet808 |
| 13 - | Cylinder |
| q | For pressure relief valve, approx. 4 bar |
| 14 - | Piston |
| q | For pressure relief valve, approx. 4 bar |
| 15 - | Spring |
| q | For pressure relief valve, approx. 4 bar |
| 16 - | Seal |
| q | Renew |
| 17 - | Screw plug, 15 Nm |
| q | Loosen with socket T70 -T10128- |
| 18 - | 15 Nm |
| 19 - | Baffle plate |
| 20 - | Seal |
| q | Renew |
|
|