A3 Mk2
| Exhaust manifold with catalytic converter - exploded view, engine code AXW, BLX, BHD, BLR, BMB |
| 1 - | Clamp |
| 2 - | 10 Nm |
| 3 - | Cable guide |
| q | For Lambda probe |
| 4 - | Lambda probe 2 -G108- |
| q | 55 Nm |
| q | Bank 2, probe 1 |
| q | Grease only the threads with high-temperature paste. The paste must not penetrate into the slots on the probe body. |
| q | Colour of connector: brown |
| 5 - | 10 Nm |
| 6 - | Lambda probe -G39- |
| q | 55 Nm |
| q | Bank 1, probe 1 |
| q | Grease only the threads with high-temperature paste. The paste must not penetrate into the slots on the probe body. |
| q | Colour of connector: black |
| 7 - | Bracket |
| 8 - | 40 Nm |
| 9 - | 25 Nm |
| 10 - | Support for exhaust manifold |
| q | Right-side |
| 11 - | Support |
| q | For catalytic converter |
| 12 - | Gasket |
| q | Renew |
| 13 - | Support for exhaust manifold |
| q | Left-side |
| 14 - | Exhaust manifold with catalytic converter |
| q | Coat studs of exhaust manifold with high-temperature paste |
| q | Removing and installing → Chapter |
| 15 - | 25 Nm |
| q | Coat studs of exhaust manifold with high-temperature paste. |
| 16 - | Gasket |
| q | Renew |
