Audi Workshop Service and Repair Manuals > A3 Mk2 > Power unit | 4-cylinder direct petrol injection engine (2.0 ltr. 4-valve turbo), mechanics | Engine assy,cylinder block,crankcase | Assembly mountings | Checking adjustment of assembly mountings (engine/gearbox mountings)

Checking adjustment of assembly mountings (engine/gearbox mountings)

–	Detach engine cover panel with air cleaner → Rep. gr.24.

–	Lift out activated charcoal filter from retainer -in direction of arrow- with pipes connected and lay aside.

The following specifications must be obtained:

t	There must be a distance of -a- = 16 mm between engine support -2- and longitudinal member (right-side).

t	The side surface of the engine support casting -2- must be aligned parallel to the support arm -1- (dimension x = dimension x).

Note

Distance a = 16 mm can also be checked with e.g. a suitable cylindrical bar.

If the distance measured is too small or too great, proceed as follows:

Audi Workshop Service and Repair Manuals