audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Poly V-belt drive with air conditioner compressor and tensioning roller - exploded view > < Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner

A3 Mk2

Removing and installing tensioner for poly V-belt
Removing and installing tensioner for poly V-belt
   
Removing
–  Detach poly V-belt from tensioner → Chapter „Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner“.
–  Vehicles with auxiliary heater: release hose clips -1- and -2- and detach air hose.
  A21-10489
–  Remove bolts -arrows-.
–  Move coolant hose -3- clear.
–  Loosen hose clip -2-.
–  Unplug electrical connector -1- at charge pressure sender -G31-/intake air temperature sender -G42- and detach air pipe (right-side).
  A21-10435
–  Remove bolt -2- and take off poly-V-belt tensioner -1-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Poly V-belt drive for vehicles with air conditioner compressor and tensioner - exploded view“
–  Install air pipe → Chapter.
–  Install air hoses with screw-type clips → Fig..
–  Install poly V-belt → Chapter.
  A13-10610

Poly V-belt drive with air conditioner compressor and tensioning roller - exploded view > < Removing and installing poly V-belt - vehicles with air conditioner compressor and tensioner