audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Silencers - exploded view > < Checking charge air system for leaks

A3 Mk2

Silencers (vehicles with engine codes CBAA, CBAB, CBBB)
Silencers (vehicles with engine codes CBAA, CBAB, CBBB)
Overview
t  → Chapter „Silencers - exploded view“
t  → Chapter „Removing and installing particulate filter“
t  → Chapter „Separating centre and rear silencers“
t  → Chapter „Stress-free alignment of exhaust system“
t  → Chapter „Aligning tailpipes“
t  → Chapter „Checking exhaust system for leaks“
  Note
t  After working on the exhaust system, ensure that the system is not under stress and that it has sufficient clearance from the body. If necessary, loosen clamp and align silencers and exhaust pipe so that sufficient clearance is maintained to the body at all points and the mountings are evenly loaded.
t  Use screwdriver to unfasten and tighten lock washers for heat shields. Tightening torque: 2 Nm.
   

Silencers - exploded view > < Checking charge air system for leaks